Connect the product to a network

Supported network protocols

To connect a networking-equipped product to a network, you need a network that uses one or more of the following protocols.

●TCP/IP (IPv4 or IPv6)

NOTE: While this product can be used over IPv6 networks, a product software installation from the CD is not supported over IPv6 networks.

●LPD Printing

●SLP

●WS-Discovery

●HP Wireless Direct

Install the product on a wired network

Use this procedure to intall the product on a wired network using Windows.

Obtain the IP address

1.Connect the ethernet cable to the product and to the network. Turn the product on.

2.Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product.

3.Touch the Network button to display the IP address.

For more information about the network connection, print a network configuration page:

1.Touch the Print Reports menu.

2.Touch the Network Configuration Page menu item to print the network configuration report.

30

Chapter 3 Connect the product

ENWW