RC3000 Antenna Controller | Chapter 1 | Introduction |
Programming Group Functions
The programming group modes provide for initial configuration of the controller and also provide screens to aid in maintenance and troubleshooting of the controller.
Configuration mode screens allow the user to customize and calibrate the operation of the RC3000 for use with a particular mount. Note that most configuration items will be factory set for correct operation with a particular mount.
REF_VOLT:2.50 OFF: 0.0 | |
CCW:180 CW:180 | SF:76.35 |
SET REFERENCE VOLTAGE <2.00 - 3.00>
Maintenance mode screens allow the user to monitor sensor inputs and perform periodic maintenance actions such as setting time and resetting drive errors.
SYSTEM:11/10/97 22:26:40 | TIME |
GPS UTC:11/10/97 22:26:40 | ZONE:CST |
DISPLAY:11/10/97 16:26:40 | OFFSET:- 6 |
8
