RC3000 Antenna ControllerChapter 1Introduction
1.4 Specifications
|
|
| RC3000A | RC3000B |
| Physical |
|
|
|
| Size |
| 19.0 inches x 3.5 inches x 17.5 inches |
|
| Weight |
| 19 lbs | 13 lbs |
|
|
| 115/230 VAC switchable 50/60Hz; 50W max | 115 OR 230 VAC 50/60Hz; 50W |
| Input Power |
| Idle;850W max Antenna Moving; optional | max Idle;850W max Antenna |
|
| universal input | Moving | |
|
|
| 115 VAC, 8Amp | 115VAC and 230VAC, 12 AMP Fast |
| Fusing |
| AMP | Blow |
| Temperature | 0C to +50C | ||
| Humidity |
| 35% to 85% (optional | |
| Antenna Drive |
|
|
|
|
|
|
| 90VDC (3/4 HP max) for 115VAC,90 |
| Azimuth/Elevation |
| or 180 VDC (1.5 HP max) for | |
|
| 230VAC input | ||
| Polarization |
| 12 VDC, 1 Amp max | |
| Electromechanical |
| 28 VDC 300mA, or 115 VAC 1Amp | 115 VAC 1Amp max (specify on |
| Brakes (optional) |
| max(specify on order) | order) |
| Waveguide/Switch |
|
|
|
| (optional) | 24VDC 2Amps max or 115VAC 1 Amp max (specify on order) | ||
| Position Sense |
|
|
|
|
|
| Potentiometer, | |
| Azimuth |
| (Reed, | |
|
|
| Inclinometer, | |
| Elevation |
| ||
| Polarization |
| Potentiometer, | |
|
|
| Five- 12 VDC inputs, standard: EL Up, EL Down, EL Stow, AZ Stow, Pol Stow.Four | |
| Limit Switch Inputs |
| additional inputs optional, mount dependent |
|
| Locate Mode |
|
|
|
| Elevation Accuracy |
| +0.2 degrees (typical) |
|
| Azimuth Accuracy |
| +1.5 degrees (typical) |
|
| Polarization Accuracy |
| +3 degrees (typical) |
|
| GPS Lockup Time |
| 0 seconds (when configured for accessory powered GPS receiver) | |
| VSAT Mode |
| Single | |
|
|
| full | |
| Autopeak Input |
| Beacon receiver output | |
|
| channels) |
| |
| Modem |
|
|
|
| Input | TTL or contact closure, (optional | ||
| Track Mode |
|
|
|
| Antenna Size |
| 0.4 – 12.0 meters |
|
| Tracking Accuracy |
| 0.1 to 3.0 dB selectable; mount dependent |
|
| Maximum Inclination | 16 deg., standard |
| |
|
|
| ||
| Tacking Modes |
| Track |
|
|
| |||
|
|
|
| |
| Backup |
| Duracell DL2450 |
|
16