![](/images/new-backgrounds/1319595/31959555x1.webp)
RC3000 Antenna Controller | Chapter 2 | Installation |
2.1.3 Fluxgate Compass
The optional fluxgate compass unit (RC3000FG) should be placed on the roof of the vehicle away from ferrous metals, electric motors, and any equipment that generates magnetic fields such as air conditioners, generators, and traveling wave tube (TWT) amplifiers. Experience has shown that the fluxgate performs best when mounted as high as possible on the vehicle. The fluxgate compass must be mounted in an upright position.
Some mounts position the compass on the mount so that the compass may be lifted well above the top of the vehicle. If the compass is attached to the mount, the compass configuration item (3.3.1.2.1) must be set to the “antenna mounted” value.
The RC3000 uses the fluxgate to determine the true heading of the mount’s azimuth centerline (0.0 degrees azimuth). If the compass is not aligned in the direction of the azimuth centerline, that difference must be described in the azimuth offset configuration item (3.3.1.2.3). Some operators prefer to mount the compass pointing forward on the vehicle. If the mount faced rearward, an azimuth offset of 180 degrees would need to be input.
Refer to the drawing of the fluxgate enclosure to verify the proper orientation of the fluxgate. NOTE: An unhoused version of the compass is available for use in a
The Fluxgate Compass box may be either bracket mounted or flush mounted. Without the bracket it may be attached to a flat surface by four
The following method may be used to determine the best location for the compass.
Park the vehicle in a location that is away from large metal objects or sources of magnetic fields. NOTE: for best results, the vehicle should be parked facing in an easterly or westerly direction. The vehicle's generator should be running, as well as all electrical equipment on the vehicle that generates magnetic fields.
20