Installing the software

If you find the right printer name, scroll sideways if necessary to see the Connection Type column, and check that it shows Bonjour/Rendezvous. Then highlight that line. Otherwise, continue searching further down the list.

If you cannot find your printer name with a Bonjour/Rendezvous connection type, check the box My printer is not in the list.

Click Continue.

10.Continue following the instructions on the screen. When you reach the Printer Queue Created screen, click Quit to exit, or Create New Queue if you want to connect another printer to the network.

11.When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.

If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the DVD.

TCP/IP connection

1.Go to your printer's front panel and press the Menu key until you see the status screen.

Note the URL of your printer (http://XXXX11 in this example).

2.Insert the HP Start-Up Kit DVD into your DVD drive.

16 Chapter 2 Installing the software

ENWW

Page 28
Image 28
HP T1100 manual TCP/IP connection, Click Continue