| Post Error Codes and messages (Continued) |
|
|
Code | Error Message |
|
|
0B33 | Power Unit Fan 1 Alarm occurred |
|
|
0B34 | Power Unit Fan 2 Alarm occurred |
|
|
0B46 | ESMINT not configured |
|
|
0B50 | CPU #1 with error taken off line |
|
|
0B51 | CPU #2 with error taken off line |
|
|
0B5F | Forced to use CPU with error |
|
|
0B60 | DIMM group #1 has been disabled |
|
|
0B61 | DIMM group #2 has been disabled |
|
|
0B62 | DIMM group #3 has been disabled |
|
|
0B63 | DIMM group #4 has been disabled |
|
|
0B6F | DIMM group with error is enabled |
|
|
0B70 | The error occurred during temperature sensor reading |
|
|
0B71 | System Temperature out of range |
|
|
0B74 | The error occurred during voltage sensor reading |
|
|
0B75 | System Voltage out of range |
|
|
0B7C | The error occurred during fan sensor reading |
0B80 | BMC Memory Test Failed |
|
|
0B81 | BMC Firmware Code Area CRC check failed |
|
|
0B82 | BMC core hardware failure |
|
|
0B83 | BMC IBF or OBF check failed |
|
|
0B90 | BMC Platform Information Area Corrupted |
|
|
0B91 | BMC update firmware corrupted |
|
|
0B92 | Internal Use Area of BMC FRU corrupted |
|
|
0B93 | BMC SDR Repository empty |
|
|
0B94 | IPMB signal lines do not respond |
|
|
0B95 | BMC FRU device failure |
|
|
0B96 | BMC SDR Repository failure |
|
|
0B97 | BMC SEL device failure |
|
|
0BB0 | SMBIOS - SROM data read error |
|
|
0BB1 | SMBIOS - SROM data checksum bad |
|
|
0BD0 | 1st SMBus device address not acknowledged |
|
|
0BD1 | 1st SMBus device Error detected |
|
|
0BD2 | 1st SMBus timeout |
|
|