Console Redirection Submenu
| Choices or |
|
|
Feature | Display Only | Description | Your Setting |
|
|
|
|
Serial Port Address | Disabled | If enabled, the console will be |
|
| Serial Port 2 | redirected to this port. |
|
| (3F8h/IRQ4) | If console redirection is |
|
| Serial Port 2 | enabled, this address must |
|
| (2F8h/IRQ3) | match the settings of serial |
|
|
| port 2. |
|
|
|
|
|
Baud Rate | 57.6K | Enables the specified baud |
|
| 19.2K | rate. |
|
|
|
|
|
Flow Control | No Flow Control | Enables flow control. |
|
| XON/OFF |
|
|
|
|
|
|
Console | Direct | Indicate whether the console is |
|
Connection | Via Modem | connected directly to the |
|
|
| system or a modem is used to |
|
|
| connect. |
|
|
|
|
|
Boot Menu
Use the up or down arrow keys to select a device, then press the <+> or
Boot Device Priority Menu
Boot Priority | Device | Description | Your Setting |
|
|
|
|
1. | ATAPI | Attempts to boot from an |
|
| Drive | ATAPI |
|
2. | Diskette Drive | Attempts to boot from a |
|
|
| diskette drive. |
|
|
|
|
|
3. | Hard Drive | Attempts to boot from a hard |
|
|
| drive device. |
|
|
|
|
|
4. | Intel UNDI, PXE- | Attempts to boot from |
|
| 2.0 (Build 071) | diagnostic boot partition of the |
|
|
| flash memory. |
|
|
|
|
|
