Removing DIMMs
!CAUTION
Use extreme care when removing a DIMM. Too much pressure can damage the socket slot. Apply only enough pressure on the plastic ejector levers to release the DIMM
1.Power off the system and ensure it is disconnected from the AC power source.
2.Open the front door and remove the left side panel as described earlier in this chapter.
3.Gently push the plastic ejector levers out and down to eject a DIMM from its socket. See Figure
4.Hold the DIMM only by its edges, being careful not to touch its components or gold edge connectors. Carefully lift it away from the socket, and store it in an antistatic package.
5.Repeat the above steps to remove the remaining DIMMs.
6.Replace the side panel, plug in the system power cord, and turn on the system.
