Intel 5800/120Ld manual Front View Hot-Swap Scsi Drive Bays

Front View (Hot-Swap SCSI Drive Bays)

Figure 2-6 shows the location of the front system controls and indicators on a system that includes the hot-swap SCSI disk drive bays.

A

B

C D

E F G

H I J K L M

A.Eject button, 3 ½-inch diskette drive

B.Activity light, 3 ½-inch diskette drive

C.Activity light, CD-ROM reader

D.Load/eject button, CD-ROM reader

E.Drive Present LED

F.Drive Activity LED

G.Drive Status LED

H.DC power ON/OFF Button

I.DC Power ON/OFF LED

J.Intrusion Indicator LED

K.Disk Fault LED

L.Sleep Status LED

M.Sleep Button

*Disk array configuration only.

Press to eject diskette.

When lit, diskette is in use.

When lit, CD-ROM reader is in use.

Press to load CD and eject CD.

When green, drive is present. See Table 2-2.

When green, Drive is active. See Table 2-2.

*Indicates drive failure. See Table 2-2.

Press to turn system DC power on or off.

When green, power is present in system. When off, power is turned off, power source is disrupted, or system is in the sleep mode. See Table 2-1 for a list and description of the system LEDs.

When OFF, the system is OK. See Table 2-1 for a list and description of the system LEDs.

When lit, a disk drive fault occurred. See Table

2-1 for a list and description of the system LEDs.

When lit, system is in Sleep Mode. See Table

2-1 for a list and description of the system LEDs.

Press to enter power saving (sleep) mode. Press again to enter normal mode of operation. This function requires a corresponding operating system.

Figure 2-6. Front System Features and Controls (Hot-Swap Bays)

2-10 Setting Up the System