Adaptec SCSI Utility
The Adaptec SCSI Utility detects the SCSI host adapters on the server board. Use the Adaptec SCSI Utility to:
!Change default values
!Check and/or change SCSI device settings that may conflict with those of other devices in the server
Running the SCSI Utility
You access the Adaptec SCSI Utility when you turn on or reboot your system. To run the Adaptec SCSI utility, perform the following procedure:
1.
2.When this message appears on the video monitor: Press
3.Press Ctrl+A to run this utility. When it appears, choose the host adapter that you want to configure.
4.The SCSI utility starts. When the Adaptec SCSI Utility detects more than one
Bus : Device : Channel | Selected SCSI Adapter | |
|
|
|
01 : 04 | : A* | AIC7899 |
|
|
|
01 : 04 | : B | AIC7899 |
*Internal SCSI connector.
5.Once you select the adapter, the following screen is displayed:
Menu | Description |
|
|
Configure/View Host | Configure host adapter and device settings. |
Adapter Settings |
|
|
|
SCSI Disk Utilities | The utility scans the SCSI bus for SCSI devices, reports a |
| description of each device. Run these utilities before |
| configuring SCSI devices. |
|
|
6.If you wish to format a disk, verify disk media, or display a list of devices and their SCSI IDs, select “SCSI Disk Utilities”. If you wish to configure the adapter or a device, select “Configure/View Host Adapter Settings”.
