Intel 5800/120Ld manual Post Error Beep Codes, Beeps Error Cause Recommended Action

Post Error Beep Codes

Beeps	Error	Cause	Recommended Action
1-2-2-3	ROM Checksum Error	—	Change system board
1-3-1-1	DRAM Refresh Test Error	—	Change memory DIMM's
1-3-1-3	Keyboard Controller Test Error	—	Change system board
1-3-3-1	Memory Not Detected	No memory.	Verify DIMM installation.
		Can not write to memory	Change memory DIMM's
	Memory Capacity Check Error	No memory.	Verify DIMM installation.
		Can not write to memory	Change memory DIMM's
1-3-4-1	DRAM Address Test Error	Memory address signal failure	Change DIMM or M/B
1-3-4-3	DRAM Test low byte Error	Memory data signal failure (low)	Change DIMM or M/B
1-4-1-1	DRAM Test high byte Error	Memory data signal failure (high)	Change DIMM or M/B
1-4-3-3	All Memory Group Errors	—	—
2-1-2-3	BIOS ROM Copy-Write Test Error	Error with Shadow RAM	Change system board
2-2-3-1	Unexpected Interrupt Test Error	Unexpected interrupt	Change CPU or system
			board
2-3-1-3	All Memory Group Errors	Memory address signal failure	Change DIMM or M/B
3-3-1-4	Memory Not Detected	—	—
1-2	Option ROM Initialization Error	Failure to initialize Option ROM	Change system board or
		BIOS	option board
1-2	Video configuration fails	Failure to initialize VGA BIOS	Change option video board
			or system board
1-2	OPTION ROM Checksum Error	Failure to initialize Option BIOS	Change M/B or option board

Problem Solving 5-17