Intel 5800/120Ld manual Removing a 5.25-Inch Device

Removing a 5.25-Inch Device

!CAUTION

CD-ROM devices contain a laser system and are classified as CLASS 1 LASER PRODUCTS. To use these devices, thoroughly read the documentation provided by the CD- ROM manufacturer, and keep the documentation for future reference. In case of any trouble with a CD-ROM, please contact your nearest service representative. To prevent direct exposure to the laser beam, do not try to open the enclosure. Use of controls or adjustments or performance of procedures other than those specified in the CD-ROM manufacturer's documentation may result in hazardous radiation exposure

1.Power off the system and ensure it is disconnected from the AC power source.

2.Open the front door as described earlier in this chapter.

3.Remove the left side panel as described earlier in this chapter.

!CAUTION

Observe static precautions. Use an antistatic wrist strap.

4.Perform Steps 4, 5, and 6 of Removing the 3.5-Inch Diskette Drive described earlier in this chapter. It is not necessary to remove the diskette drive from the mounting bracket to which it is mounted.

5.Disconnect the SCSI Interface cable and voltage cable from the rear of the device you are removing.

6.Remove the screws securing the device to the removable media device bay. See Figure 4-32, A, B.

B

A

Figure 4-32. Removing a Removable Media Device

4-32 Upgrading Your System