Data Dialog Box
The Data dialog box displays the CMOS, ESCD, or DMI data of a server. This dialog box also allows the following operations.
!Compare Current Data — The previously acquired data of the current server is compared with the present data of the server, the previously acquired data of another server, or file data.
To compare with the data of another server, select a server in the Select a server dialog box. If an error is detected by this comparison, the Data Differences dialog box displays the compared data.
!Read Data from Server — The present data of the current server is acquired and displayed. The Save As button is used to save the acquired data in a file.
Temporary Change to Remote Drive Dialog Box
The Temporary Change to Remote Drive dialog box changes a remote drive for a server temporarily.
If [Floppy A:] is checked, a floppy disk drive on
If [FD Image File:] is checked, a specified FD image file in the management PC becomes a remote drive for the server.
If [Read Only] is checked, one FD image file can be used by more than one server. Since no FD image file can be created or copied in this dialog box, create a file using the Defaults command or the Properties command in advance.