Pop-Up Menus
Clicking the right mouse button in a server window displays a
!Connect command — connects the current server to the management PC. Once the server has been connected, [Connected] is displayed in the title bar and the server screen displays in the server window.
!Disconnect command — closes the connection to a current server. Once the server has been disconnected, [Not Connected] is displayed in the title bar.
!Change Remote Drive command — temporarily changes the remote drive of a current server. This command can be executed only when a remote drive is in use. Set the necessary information in the Temporary Change to Remote Drive dialog box. This command does not update the server properties. The setting becomes invalid when the server is disconnected.
!Pause POST command — pauses the server in the middle of POST when the current server is executing POST. To resume POST, select the Go to End of POST command, then select Go (MWA mode) command, or the Go (No MWA mode) command.
!Go to End of POST command — pauses the server at the end of POST when the current server is executing POST. To resume booting, select the Go (MWA mode) command or the Go (No MWA mode) command.
!Go (MWA mode) command — When the Go (MWA mode) command is selected when POST is paused, the server resumes POST and executes booting in MWA mode.
!Go (No MWA mode) command — If the Go (No MWA mode) command is selected when POST is paused, the server resumes POST and executes booting in No MWA mode.
!Restore Final Screen command — displays the remote console screen as it appeared immediately before the server was disconnected. This command becomes valid after the server is disconnected.
!Clear Screen command — clears the remote console display. This command becomes valid after the server is disconnected.
!Server Summary
