Alerting ESMPROTM
If MWA receives an alert message from a server, it sends this message to ESMPRO™ AlertManager. Alert types from MWA to ESMPRO are as follows.
!Alerts from the server RomPilot
System Reset
*POST stalled (Reset by POST stalled)
*SMI stalled (Reset by SMI stalled)
*Boot failed (Reset by boot failed)
POST end (Booting)
POST error
Security breach attempted
!Alert from the server System Management Controller (SMC)
Sensor limit alarm
CPU missing
POST stalled
SMI handler alarm
SMI handler stall
*Not supported by some server models.
Dialog Boxes
Select a Server Dialog Box
The Select a server dialog box displays a list of
Server Properties Dialog Box
From the Server Properties dialog box you can view and set properties for the current server. The contents of the server properties are as follows:
!ID page — provides server identification information, such as a server name, an IP address, a MAC address, and a UUID.
!Alert page — Sets MWA operation for each type of alert which comes from a server.
![Sound] is checked — MWA beeps when an alert is received from a server. The server window of the server becomes active.
