Kodak 9150DC, 9125DC, 9090DB, 9090DC manual Installation, Contents Installing the exit deflector

2 Installation

Contents

Installing the exit deflector

Installing the exit deflector	2-1
Installation: with a USB connection	2-2
Installation: with an optional SCSI connection	2-3

This section provides detailed information supporting the Installation Guide that is provided with your scanner. Follow these steps in the order they are provided to install your scanner.

NOTES:

•If you have already performed all of the steps in the Installation Guide, skip this section.

•When positioning the scanner, be sure to provide adequate clearance at the back of the scanner if you will be using the rear document exit. For more information on the rear document exit, see Appendix C, Installing and Using the Straight Pass-Through Adapter.

•The scanner weighs approximately 112 pounds (50.8 kg). Be sure to incorporate the appropriate manpower before moving or lifting the scanner.

•Verify that your host PC meets the system requirements as specified in Appendix A, Specifications.

•The scanner is packed with a set of language-specific Control Panel overlays. The English overlay is installed on the scanner. If you prefer a different language, take the desired overlay and adhere it to the control panel.

The scanner is packed with two exit deflectors. The exit deflector aids in better document stacking. The standard exit deflector should be used for most of your scanning needs. The lightweight exit deflector should be used when scanning light-weight documents.

•Install the exit deflector by clipping it to the rail at the top of the scanner.

A-61662 October 2011 2-1