Configuration tab: allows you to configure advanced scanner features.
Front Panel MF Ignore Button Mode — allows you to select how the MF Ignore button on the control panel will operate.
•Ignore MF Alarm on the Next Page Only: when you select this option, it allows you to momentarily turn off the multifeed alarm on the next document entering the transport by pressing the MF Ignore button on the control panel. This is helpful if you know that a false multifeed (i.e., sticky note is attached to a page or there is an envelope in the batch) is about to be scanned. In this mode, you can continue to hold the MF Ignore button down and the scanner will continue to ignore any multifeeds over multiple pages. When the button is released, MF Ignore turns off.
•Ignore MF Alarm until Feeder Empties: when you select this option, it configures the MF Ignore button to temporarily turn off the multifeed alarm during the next batch. This is helpful if you know that false multifeeds will occur over several or all documents in a batch. In this mode, press the MF Ignore button once to toggle multifeed ignore on, and press the button again to turn it off. If MF Ignore is on, it will automatically be turned off when the feeder empties.
When finished, click Save to save your changes and close the Advanced Settings window.
