Scanner Self Test — displays the results of the internal scanner fault monitoring. A green checkmark icon indicates that no scanner faults were detected.
A red X icon indicates one or more scanner faults were detected. The text box will list each fault detected.
If the Self Test monitor displays a fault(s), power cycle the scanner and check the Scanner Self Test monitor again. If the problem persists, refer to Chapter 7, Troubleshooting.
Maintenance monitor — this section of the Home screen displays any scanner maintenance and the type of maintenance needed (i.e., clean transport, replace feed rollers, etc.). Monitored maintenance includes:
•Clean feed rollers
•Clean transport
•Clean optics (e.g., imaging guides, camera glass covers, sensors)
•Replace feed rollers
•Calibration of the front/back camera
•Replace imprinter ink cartridge (if optional imprinter is installed)
The Maintenance monitor also displays when or how soon specific maintenance should occur in the form of a bar graph. See Chapter 6, Maintenance for detailed maintenance procedures.
When a maintenance item’s
NOTE: The presence of a red bar graph will not disrupt or stop the scanner.
