Offset from Top — specify the distance of the imprinter string from the top of each page. The default and minimum value is 0.5; the maximum value is 25.5 inches. You must enter whole numbers for pixels and millimeters, but you can enter decimal numbers in 0.1-inch increments for inches.

NOTE: The horizontal location for imprinting must be manually set inside the scanner.

Print String Definition, Maximum String Length and Remaining Count — use the Print String Definition text box to set up and/or modify the text string that you want imprinted or annotated on a document. You can provide information for the text string by typing a text string in the text box or inserting pre-formatted information from the Page Counter and Insert Dynamic Content drop-down lists. You cannot insert text using the cut and paste function.

You can see how the text string will appear as imprinted or annotated text in the Actual Printed Example field.

Exceeding the maximum string length of 72 results in the string being truncated to the maximum length. Because the imprinter/annotation string is made up of text, a page counter, and dynamic content, consider their combined length and the character placeholders remaining (shown in the Remaining Count box) when setting the string length.

Actual Printed Example — the text displayed under Actual Printed Example shows how the current imprinting or annotation text will look with any optional date and time stamp, special content, or page counter expanded. When a date and time format is specified, the current date and time are applied.

A-61662 October 2011

B-15

Page 89
Image 89
Kodak 9150DC, 9125DC, 9090DB, 9090DC manual