Ngenuity Batch Counter

Ngenuity Operator Utility

The Ngenuity Batch Counter application can be started from

Start>Programs>Kodak>Ngenuity 9000 Scanner>Ngenuity Batch Counter.

This application provides two resettable Batch counters which allow you to keep track of the number of documents scanned in a batch and/ or within a shift.

The top counter can be reset to 0 by clicking the C button next to the counter. The bottom counter (total counter) will not be reset to 0 if the top counter is cleared. To clear both counters, click the C button next to the bottom counter.

The Ngenuity Operator Utility (NOU) is the application that communicates with the scanner to provide scanner status, configure scanner settings and to monitor and assist with performing routine scanner maintenance.

Be sure your scanner is properly connected and the scanner and host PC are on before accessing the Ngenuity Operator Utility.

From the host PC’s desktop, double-click the Ngenuity Operator Utility icon. The NOU will run through an initialization sequence. When communication with the scanner is established, the scanner and connection type will be displayed on the Home screen of the NOU.

NOTE: Any changes made to NOU settings with the scanner powered off or disconnected from the PC will not be present when the scanner is turned on or reconnected.

4-8

A-61662 October 2011

Page 28
Image 28
Kodak 9125DC, 9150DC, 9090DB, 9090DC manual Ngenuity Batch Counter Ngenuity Operator Utility