Kodak 9150DC, 9125DC, 9090DB, 9090DC manual Center position

3.Move the carriage to the center position.

4.Hold the ink cartridge holder with one hand and place the ink cartridge (bottom end first) into the holder and snap it into place.

Center position

5.Turn off the scanner and power down the PC.

6.Remove the scanner exit tray.

7.Open the front page imprinter door.

8.Insert the imprinter’s spring-loaded locating pin into the correspond- ing hole found in the scanner’s front page assembly (left side) with the ink cartridge holder.

Thumb screw

Ink cartridge

Imprinter door Spring-loaded location pin

9.Hand-tighten the thumb screw located on the right side of the imprinter into the corresponding hole found in the scanner’s front page assembly.

A-61662 October 2011 B-3