Toggle Color Mode screen The Toggle Color Mode screen provides the following features.
Preferences
•Use patch code detection to toggle color mode — check this box to enable toggle patch detection.
•Start in Black and White — when checked, the batch will automatically start in Black and White mode, otherwise the batch will start in either color or grayscale as determined by the basic batch setup scan mode.
•Delete images from toggle patch sheets — when checked, images for the toggle patch sheets will be automatically deleted by VRS.
•Enable patch confirmation tone — when checked, a confirmation tone will signal that a patch has been recognized. If grayed out, this feature is not currently supported by the scanner firmware.
These patch codes are recognized when toggle color mode is enabled:
Black & White Settings
•Black and White DPI — select the DPI to use when the scanner switches to Black and White mode. This can be different than the color (or grayscale) DPI selected elsewhere for the batch. For example, basic batch setup selects Color 150 dpi, but black and white images use 300 dpi. Refer to the Kofax VRS Users Guide or VRS online help for more information regarding this feature.
