Accelerated scanning (VRS only)

If you want to improve the scanning throughput at 300 dpi (or greater), you can change your acceleration scanning setting. To do this:

1.If using Windows 7, from the Taskbar, click the Up arrow to access the Admin Utility.

2.Right-click the VirtualReScan icon.

3.Select Admin Utility. The Virtual ReScan Administration Utility dialog box will be displayed.

4.Select the Accelerated Scanning tab.

5.Move the slider bar to Acceleration: Maximum.

6.Click Save.

NOTE: Changing this setting may produce a slight reduction in image quality.

3-4

A-61662 October 2011

Page 20
Image 20
Kodak 9125DC, 9150DC, 9090DB, 9090DC manual Accelerated scanning VRS only, Select the Accelerated Scanning tab