Kodak 9150DC, 9125DC, 9090DB, 9090DC manual Click Text Controls

Print position: software To set up the software for imprinting, access the Advanced Properties screen which is accessible within Virtual ReScan® (VRS) Interactive Viewer.

Scanning applications that use the VRS-based driver will display the VRS icon in the Windows Taskbar on the host PC as soon as the scan source is selected.

NOTE: For instructions on how to select the scan source (scanner), see Chapter 4, Control Panel and Ngenuity Operator Utility.

1.Right-click on the VRS icon located in the Taskbar to launch the Interactive Viewer.

2.Click Preview.

3.Within the Interactive Viewer, access the Advanced Properties screen by clicking the Scanner Driver Settings icon (tools image).

4.In the Advanced Properties screen, click on the Imprinter menu item to display the Imprinter controls.

5.Enable the imprinter you want to use: Front Page Prescan or Back Page Postscan.

6.Click Text Controls.

NOTE: When VRS is not installed, imprinter controls can be found in your Direct ISIS and TWAIN settings.

A-61662 October 2011 B-11