Kodak 9090DC, 9125DC, 9150DC, 9090DB manual Status, Door, Maintenance and Manual Feed

Status	The status area of the control panel consists of: Power Mode, Back
	Door, Maintenance and Manual Feed.
	Power Mode — this green LED indicates the power status or transition
	between power modes.
	Power State/Transition	Power Mode LED
	Off	Off
	Sleep>Powered up	Blinking, fast
	Ready>Active	Steady green
	Ready>Sleep	Blinking, fast
	Sleep	Blinking, slow
	When the scanner is in sleep mode, the Power Mode LED is the only
	indicator that is active; all others are off.
	Depending on the current Power Mode, the buttons on the control panel
	perform different actions. The following table identifies the function of
	the buttons during various Power Modes and transitions.
	Power State/Transition	Power Mode LED
	Off	Control panel and scanner are not on.
	Sleep>Ready	Buttons are not active during this transition.
	Ready>Active	All buttons perform their normal functions. Press and
		hold the Stop button for 5 seconds to start the
		transition process to put the scanner into sleep
		mode.
	Ready>Sleep	The scanner is almost ready to go into sleep mode. A
		momentary press of any button resets the sleep
		count-down timer.
	Sleep	A momentary press of any button starts the Sleep >
		Awake transition to awaken the scanner.

Back Door — this green LED indicates if the straight pass-through door (located at the back of the scanner) is open or closed.

•LED Off: when the straight pass-through door is closed, the rotary path to exit tray is in use.

•LED On: when the straight pass-through door is open, scanned documents will exit through the straight pass-through door.

A-61662 October 2011 4-3