Editing the RX in Memory Password (PW)

CAUTION

Use these instructions to edit your RX in Memory PW. Once it has been set, store these instructions in a place separate from the User Manual to prevent unauthorized use of the password.

1 Press the PROGRAM Key and scroll to the RX OPERATION? menu selection.

2 Scroll to the MEM RX MODE menu and press YES.

3 Determine if you want Memory Receive ON or OFF and press YES.

4 Assuming you want it ON, you will now need to enter the times you wish it to be active. Enter the ON tine and press YES.

5 Then enter the OFF time and enter YES.

6 At the next screen, enter the 4-digit password for the Memory Receive function.

RX OPERATION?

YES / or 1-9

1 MEM RX MODE? OK=YES

ON *OFF -SELECT&PUSH”YES”-

ON TIME=_0:00

OK=YES

OFF TIME=_0:00

OK=YES

PASSWORD=_ OK=YES (DEL=NO)

CAUTION

Once the password is entered, you cannot edit it without having the old password. If the old password is not available, choose another mailbox to use. Call your Service Representative for help in locating your Password from within machine memory.

7 Use pencil to note the assignments. This will allow you to change them as needed. Remember to file this in a secure place.

Memory Receive PW (Password)

8 Once the Memory Receive PW has been entered, a message appears informing you it has been used. If you wish to edit this information, follow the instructions given in the display.