Machine Operations

Setting the Power Save Mode

This program allows the user to set their fax unit to automatically enter the power saving mode at a specified time. You can also set the Power Save Mode to OFF. If the ON time and the OFF time are set the same, the Power Save Mode will remain ON continuously.

1 Press the PROGRAM Key and scroll through the menus until you reach the Machine Operations menu and press YES.

2 Press 4 or press the down arrow four times to reach the Power Saver Mode Menu. Press YES.

3 Use the Left/Right Arrow Keys to select either OFF or TIMER and press YES.

MACHINE OPERATION? YES / or 1-7

4 POWER SAVE MODE? OK=YES

OFF*TIMER -SELECT&PUSH”YES”-

Note: The ON time refers to the time the unit will go into Power Saver Mode. The OFF time is the time it will re-enter a READY or STANDBY mode.

4

5

Enter the time you wish the unit to enter Power Saver Mode and press YES.

Enter the time you wish the unit to leave Power Saver Mode and return to normal operation.

ON TIME=_0:00

OK=YES

OFF TIME=_0:00

OK=YES

Selecting Remote Monitor

This function allows service personnel to access the unit remotely. It is possible for the Service Representative to monitor and change machine settings. This allows them to fix your unit over the telephone.

1 Press the PROGRAM Key and scroll through the menus until you reach the Machine Operations menu and press YES.

2 Press 5 or press the down arrow five times to reach the Remote Monitor Menu. Press YES.

MACHINE OPERATION? YES / or 1-7

5 REMOTE MONITOR? OK=YES

Facsimile Programming

4 - 9