Relay Initiate

Relay Initiate

Relay TX allows the operator to make one long distance call to a remote unit and the remote unit will relay the message to one or more fax units in the local area. With this function, you can save valuable time and telephone charges. This function can also instruct the remote fax machine to send an activity report to one of its One-Touch or Speed Dial location.

Note: If no One-Touch or Speed Dial Keys were set up, no reports will be generated.

Procedure

1 Select the Original Type, Resolution if necessary and place your document in the Document Feeder face down.

2 Press the FUNCTION Key and press 7 to select the Relay Initiate menu.

3 The following messages appear briefly to confirm your selection.

4 Enter the One-Touch key of the remote fax unit or enter the phone of the remote unit manually and press YES.

5 The name or telephone number associated with the One-Touch appears to confirm this is the location you intended to poll. Press YES to accept or NO to enter a new location.

6 Using the 10-Key Pad, enter the two digit One- Touch number in the remote fax machine that represents the end locations you wish to transmit to.

NOV.06 15:38

100%

-SET DOC. FACE DOWN-

FUNCTION

SEL. 1-7 OR FUNCTION

7 RELAY INITIATE? OK=YES-SEL. RELAY STATION-OT01=DALLAS OK=YES (DEL=NO)RELAY GP NO.=_

OK=YES

7 Using the 10-Key Pad, enter the two digit Speed Dial number in the remote fax machine that represents the fax unit that should receive the TX Results Report.

REPORT SD NO.=88 OK=YES (DEL=NO)

8 Press START to begin transmitting. Your document is scanned into memory and sent to the Relay location.

3 - 8

Advanced Facsimile