Document Scan Settings

Scan Contrast

There are three contrast levels of Light, Normal, Dark that you can select depending on your original document. For documents with very fine or light characters, choose a lighter level.

1 Press the PROGRAM Key and scroll through the menus until you reach the SCANNING & PRINTING Menu. Press YES to begin programming.

2 Press 2 or scroll down to the Scan Contrast menu and press YES.

3 Using the Left and Right arrows, select the contrast you wish to have as the default and press YES to enter this selection into memory.

SCANNING&PRINTING? YES / or 1-5

2 SCAN CONTRAST? OK=YES

LIGHT *NORMAL DARK -SELECT&PUSH”YES”

Print Density

Set the print density according to your needs. There are six printing density levels ranging from Light to Dark.

1 Press the PROGRAM Key and scroll through the menus until you reach the SCANNING & PRINTING Menu. Press YES to begin programming.

2 Press 3 or scroll down to the Print Density menu and press YES.

3 Using the Left and Right arrows, select the density you wish to have as the default and press YES to enter this selection into memory.

SCANNING&PRINTING? YES / or 1-5

3 PRINT DENSITY? OK=YES

*STD FINE EX-FINE -SELECT&PUSH”YES”

Facsimile Programming

4 - 13