Setting Up the (Optional) PFU

Loading the Cassette

1

2

3

4

5

Remove the Cassette from the vinyl bag.

Remove the shipping tape and cardboard.

Note: To remove the Baseplate retaining cardboard, carefully slide them forward and then remove.

Press down the Baseplate until it locks into position.

Place a sheet of paper on the baseplate and check to see that the Cassette is set for that paper size.

Note: Refer to the Specifications for appropriate paper sizes.

To change the Cassette Paper size, remove the necessary screws and reposition the guides for the new size.

Note: Do not overtighten the screws. They can strip out if care is not taken.

6 Fan the paper stack thoroughly and align its edges.

7 Load the paper into the Cassette.

Note: If you are using pre-printed stock such as letterhead, place the side to be printed face down.

A - 14

Unpacking & Installation