Dial Registration

Dial Registration

This section gives instructions on how to program the number to be stored in the One- Touch, Speed Dial and Group Dial Keys. In addition, it shows you how to set up special parameters for each One-Touch Key, including batch Time and Relay Broadcast.

One-Touch Keys

You can program the most frequently dialed fax numbers into One-Touch Keys. This allows you to transmit documents simply by pressing a One-Touch Key and the START Key. You can program any of the One-Touch Keys as Group Dial Keys with up to 50 locations in each.

1 Press the PROGRAM Key and scroll through the menus until you reach the DIAL REGISTRATION Menu. Press YES to begin programming.

2 Press YES since this is the first menu to appear and press YES to enter the One-Touch Program.

3 Press the One-Touch Key you wish to program.

4 Press YES to accept your selection.

5 Enter the Telephone number you wish to transmit to and press YES.

6 Enter the Name you wish associated with this number and press YES after checking to see it OK.

Edit/Deleting

DIAL REGISTRATION? YES / or 1-5

1 ONE-TOUCH DIAL?

OK=YES

-SELECT REGIST. KEY-

ONE-TOUCH 01

or PRESS “YES”

OK=YES

NAME=_

OK=YES

1 If you wish to change any entry, a screen allows you to accept or change.

2 If you wish to change a Key that was previously

 

REGISTERED! KEEP?

programmed, this message appears. Press YES to

OK=YES (EDIT/DEL=NO)

keep this location as is, or NO if you wish to edit it.

 

 

3 If you choose NO, use the arrow keys to select either EDIT or DELETE and then proceed with the needed changes.

EDIT *DELETE -SELECT&PUSH”YES”-

4 - 16

Facsimile Programming