TX Operation

Closed Network TX

When closed network TX/RX mode is set ON, transmission is possible only with the destination stations registered in One-Touch and Speed Dial.

1 Press the PROGRAM Key and scroll through the menus until you reach the TX Operation Menu. Press YES to begin programming.

2 Press 1 or scroll down to the Closed Network menu and press YES.

3 Using the Left and Right arrows, select the option you wish to have as the default and press YES to enter this selection into memory.

TX OPERATION?

YES / or 1-2

2 CLOSED NETWORK? OK=YES

ON*OFF -SELECT&PUSH”YES”-

Fax Forwarding

This allows a user to set 20 different remote telephone numbers for fax forwarding. If you specify a telephone number, only those messages from that number will be forwarded. If you don’t specify a remote telephone number, all the incoming message will be forward to specified location.

1 Press the PROGRAM Key and scroll through the menus until you reach the TX Operation Menu. Press YES to begin programming.

2 Press 3 or scroll down to the Fax Forwarding menu and press YES.

3 Select a location number 01 through 20 to which you wish forward your messages. Press YES to enter this selection into memory.

4 Select either ON or OFF and press YES.

TX OPERATION?

YES / or 1-2

3 FAX FORWARDING? OK=YES

FORWARD NO.=_1 OK=YES / or 01-20

FORWARD TX =ON OK=YES

5

Select the day you wish the forwarding to begin

 

 

SEL. START DAY=SUN.

 

 

and press YES.

 

 

OK=YES / or 0-6

 

 

 

 

 

 

 

 

 

 

 

4 - 24

Facsimile Programming