RX Operation

Continuous Poll RX

Poll the specified location with pre-set timer. Up to 10 groups can be set for polling, and each group can set 10 locations.

1 Press the PROGRAM Key and scroll through the menus until you reach the RX Operation Menu. Press YES to begin programming.

2 Press 10 or scroll down to the Continuous Polling RX menu and press YES.

3 Enter the Poll Group number you will to assign to this group and press YES.

4 The next screen indicates that this Poll Group is not active. Press YES to continue.

5 Select a start day to begin polling. Press YES to continue.

6 Select a stop day to finish polling. Press YES to continue.

7 Enter a start time to begin polling. Press YES to continue.

8 Enter a stop time to finish polling. Press YES to continue.

9 Enter the number of minutes between each redail. Press YES to continue.

10 Enter the remote fax number to be polled.

11 Press YES to continue.

RX OPERATION?

YES / or 1-9

10 CONTI. POLLING RX?

OK=YES

POLL GROUP NO.=_1 OK=YES /or 01-10

POLL GROUP 01 =OFF OK=YES(Fin.=START)

SEL. START DAY=SUN. OK=YES / or 0-6

SEL. STOP DAY=SUN. OK=YES / or 0-6

START TIME=_0:00 OK=YES (DEL=NO)

STOP TIME=_0:00 OK=YES (DEL=NO)

REDIAL TIME=1 Min. OK=YES / or 1-8

ENTER POLLING FAX NO.

NO.001=_ OK=YES (DEL=NO)

Facsimile Programming

4 - 33