Sending a Document

Using Combination Dial

This is used when the number exceeds the 30 digit limit for a single location. The number is split between two locations and the two are automatically linked when the first of the two is used. It is possible to input dialing numbers continuously. You can enter another One-Touch, Speed Dial or Ten Key followed by the combination dial numbers (phone numbers last digits is ‘+’ in One Touch or Speed Dial Key). The telephone number limit is

30digits.

1 Place your document face down on the Document Feed Tray.

2 Adjust the Document Side Guides to the edges of the document.

3 Use the TYPE ORG. Key to select the desired contrast:

4 Use the RESOLUTION Key to select the desired resolution:

5 Press a One-Touch Key.

•The One-Touch number should have a “+” at the end indicating an additional Key has been programmed to extend the length of the number.

6 Press the second One-Touch key containing the additional numbers and press

START.

•The unit scans the document into memory and sends it to the location you selected.

•The unit automatically returns to standby mode when finished transmitting.

7 To stop a transmission, press the STOP Key.

2 - 6

Basic Operations