Set Printer (2002 Only)

PCL4

Allows users to select PCL4 printer emulation which supports 300 dpi. If the LCD displays, “PCL4/GDI CHANGE, RESTART YOUR FAX” because memory reallocation (refer to Memory required for printer” ), it is necessary to power OFF the fax machine and then turn the power back ON (wait approximately 6 seconds before turning unit back ON).

Note: Please be sure to print (clear) any documents from Fax memory before selecting PCL4.

1

2

Press the PROGRAM Key and scroll through the menus until you reach the Set Printer menu and press YES.

Press 7 or scroll down to the PCL4 Enhance menu and press YES.

SET PRINTER? YES / or 1-8

7 PCL4 ENHANCE? OK=YES

3

4

Select either ON or OFF depending on your needs. Press YES to accept this data into memory.

If you chose YES, you must restart your unit to make this change active.

ON*OFF -SELECT&PUSH”YES”-

PCL4/GDI CHANGE RESTART YOUR FAX

5 - 6

PC Printing & Scanning