Polling TX

Polling TX

Polling TX allows you to set a document to be retrieved by a remote fax machine. Your fax machine will automatically send the stored document in response to polling requests from remote devices. You need to set a 4-digit security code to prevent unauthorized polling.

Polling TX offers Single and Multi Modes.

•In Single Mode, the specified file will be deleted after it has been successfully transmitted.

•In Multi Mode, the specified file has to be manually deleted during a polling TX or by Cancel Reservation Session.

Note: You need to set a 4-digit security code to prevent unauthorized polling. Contact your Key Operator to have this set up for you.

Procedure

1 Select the Original Type, Resolution if necessary and place your document in the Document Feeder face down.

2 Press the FUNCTION Key and press 5 to select the Polling TX menu.

3 The following message appears briefly to confirm your selection.

4 Enter the 4-digit Polling PW and press YES.

NOV.06 15:38

100%

-SET DOC. FACE DOWN-

FUNCTION

SEL. 1-7 OR FUNCTION

5 POLLING TX? OK=YESPOLLING PW=_ OK=YES (DEL=NO)

5 If you enter the wrong PW you are prompted and then given an opportunity to enter the correct PW number.

6 Select either Single or Multi and press YES to start the Polling session.

7 Your document is scanned into memory, ready for it to be polled. The “P” in the Message Display indicated the Polling Document is in memory.

*WRONG POLLING PW**SINGLE MULTI-SELECT&PUSH”YES”-NOV.06 15:38 100%

-SET DOC. FACE DOWN-

3 - 6

Advanced Facsimile