TX Operation
TX Operation
Default TX
This function is used to set the default TX mode of the fax unit. Two options are available:
Choices Available | Description |
|
|
Memory TX | When set in this mode, documents are scanned into |
| memory for transmission and dialing starts after the first |
| pages is scanned (Quick TX). |
|
|
ADF TX (Direct | When set in this mode, documents are scanned for |
Transmission) | transmission after connection has been made to the |
| receiving unit. (When the available memory is insufficient, |
| please select ADF TX for a successful transmission) |
| If line is not available, the message “LINE IS BUSY” will be |
| displayed. The facsimile will retry based on the number of |
| redial attempts and intervals that were preset. |
|
|
Note: In Memory Transmission Mode, you can retrieve your original document sooner than you can in ADF TX (Direct Transmission) Mode.
1 Press the PROGRAM Key and scroll through the menus until you reach the TX Operation Menu. Press YES to begin programming.
2 Press 1 or scroll down to the Default TX menu and press YES.
3 Using the Left and Right arrows, select the option you wish to have as the default and press YES to enter this selection into memory.
TX OPERATION?
YES / or
1 DEFAULT TX? OK=YES
*MEM TX ADF TX -SELECT&PUSH”YES”-
Facsimile Programming | 4 - 23 |