Setting Up Fax Unit

Loading Paper

1

2

3

4

Remove the shipping tape from the Tray Cover.

Remove the Tray Cover.

Remove the shipping tape and foam from inside the Tray cavity.

If you are loading Letter or A4 size paper, pull the Tray Extension out to the first stop.

5

6

If you are loading Legal size paper, lift the Tray Extension slightly and pull it out to the second stop.

Place a piece of paper in the tray and test to see the Side Guides are in the correct position for your paper.

7 To change the positions of the Guides to a new size paper, snap them out and re-locate them.

8 Place paper in the Tray and push the Tray Extension in against the end of the paper.

Note: Refer to the Specifications Chapter for information on what type and size papers can be fed from this Tray.

9 Replace the Tray Cover.

Note: When placing paper in the Tray, always remove any remaining paper and place it on top of the new paper.

A - 8

Unpacking & Installation