PCL4 Emulation (2002 only)

Setting Up the Computer Application Printer Driver

1 From the setup program in your software application, select the HP LaserJet Series

IIprinter type. If you are using optional memory, we recommend you select the HP LaserJet IIP.

2 Set your software applications printer options to match the following items:

•Match the paper size with the size loaded in your paper cassette.

•Match the memory size in the driver to that of the your unit.

Note: If your software application does not provide HP LaserJet II drivers, you should obtain them from the application vendor.

Basic Operation

This section explains standard printing with the 2002. The display provides information about printer activities.

Using the Manual Feed Tray to Print

Use the Manual Feed Bypass to print on paper that is a different size than the paper you have loaded in the paper cassettes, or for printing on thick paper, such as envelopes. If paper is present in the Tray, the unit automatically selects it.

1

2

Place the paper on the tray and adjust the Side Guides.

Print to the 2002 from your PC.

Printing Envelopes

Follow these steps to print an envelope.

1

2

In the application, configure the paper size for the envelope.

Place the envelope facing down in the manual feed tray with the narrow end leading into the center of the unit.

3 Adjust the Side Guides to the edges of the envelope.

4 Perform the steps in the software application to print.

5 - 10

PC Printing & Scanning