RX Operation

4

5

6

To select Memory RX ON, use the left and right Arrow Keys to select ON and press YES.

Enter the time you wish to start receiving messages into memory.

Note: If the ON and OFF time are identical, messages will always be received into memory.

Enter the time you wish to stop receiving messages into memory.

*ONOFF -SELECT&PUSH”YES”-

ON TIME=_0:00

OK=YES

OFF TIME=_0:00

OK=YES

7 If a password was set for this feature, you have to enter it for this to work. If you need a password, contact your Key Operator.

8 If you have your unit programmed for Memory RX with the Timer turned ON, your screen shows the following message.

9 If you have your unit programmed for Memory RX with the Timer turned ON and a Password required, your screen shows the following message.

10 The ready message for your unit now shows that Memory RX is active.

*M-RX-ON*

<T>

*M-RX-ON* <T><PWD>

<<M-RX>> 100%

-SET DOC.FACE DOWN-

4 - 28

Facsimile Programming