Set Printer (2002 Only)

GDI Enhance

Allows users to select the GDI printer driver which supports 600 dpi. Additional memory is necessary for printing documents at 600 dpi.

Note: If your unit generates a “MEMORY FULL” report while attempting to print a document using PCL4 emulation, or the Window GDI Driver and does not print your document, your unit requires additional memory.

Note: Since the fax unit must be turned OFF when switching to PCL4 emulation or Windows GDI Driver, make sure that any documents stored in memory are printed out first.

1

2

Press the PROGRAM Key and scroll through the menus until you reach the Set Printer menu and press YES.

Press 7 or scroll down to the PCL4 Enhance menu and press YES.

SET PRINTER? YES / or 1-8

8 GDI ENHANCE? OK=YES

3

Select either ON or OFF depending on your needs.

 

 

ON

*OFF

 

Press YES to accept this data into memory.

 

-SELECT&PUSH”YES”-

 

 

4

If you chose YES, you must restart your unit to

 

 

 

 

PCL4/GDI CHANGE

 

make this change active.

 

 

RESTART YOUR FAX

 

 

 

 

 

 

 

PC Printing & Scanning

5 - 7