Polling RX

Polling RX

Polling RX allows you to obtain stored documents in another fax by calling the remote fax and instructing it to transmit. To receive (poll) the document, you need to enter the correct polling PW number.

Your unit sends the Polling PW code to the remote unit. The remote unit allows your unit to poll if your PW code matches the remote unit document PW.

Note: Contact the Key Operator of the remote unit for the correct Polling PW number.

Procedure

1 Press the FUNCTION Key and press 6 to select the Polling RX menu.

2 The following message appears briefly to confirm your selection.

3 Enter the One-Touch key of the remote fax unit or enter the phone of the remote unit manually and press YES.

4 The name associated with the One-Touch appears to confirm this is the location you intended to poll. Press YES to accept or NO to enter a new location.

5 Enter the Polling PW for the remote location.

If you do not have this PW, you will have to contact the Key Operator for the remote fax unit for this information.

FUNCTION

SEL. 1-7 OR FUNCTION

6 POLLING RX? OK=YES

NO.001=_

OK=YES (SUB= )NO.001=DALLAS OK=YES (DEL=NO)

POLLING PW=_ OK=YES (DEL=NO)

6

7

You are given the opportunity to enter additional locations to poll. To finish, press START.

You are given the opportunity to check the destinations you have selected. To initiate the Polling session, press START.

NO.002=_(Fin.=START)CHECK DESTINATIONS?OK=YES (Fin.=START)

Continuous Polling RX

Your unit can be programmed to continuously poll up to ten groups. Each group can contain up to ten location. This allows a central unit to poll remote units on a continuous basis. Any time a document is placed in the remote unit for Polling TX, you machine will automatically receive it. Refer to the Program section for programming details.

Advanced Facsimile

3 - 7