Dial Registration

Entering

1 Press the PROGRAM Key and scroll through the menus until you reach the DIAL REGISTRATION Menu. Press YES to begin programming.

2 Press 5 or scroll down to the Batch TX menu and press YES.

3 Press the One-Touch Key you wish to use.

4 Enter the time at which the batch should be transmitted and press YES to accept.

•This screen confirms your entry.

5 Press the START key to enter this information into memory, or press NO to exit.

Edit/Deleting

DIAL REGISTRATION? YES / or 1-5

5 BATCH TX?

-SELECT REGIST.KEY- OK=YES

ONE-TOUCH 25

TX TIME=_0:00

OK=YES

*SET ONE-TOUCH 25

23:00

-SELECT REGIST. KEY- (COMPLETE=NO)

1 If you wish to change any entry, a screen allows you to accept or change.

2 If you wish to change a Key that was previously

 

REGISTERED! KEEP?

programmed, this message appears. Press YES to

OK=YES (EDIT/DEL=NO)

keep this location as is, or NO if you wish to edit it.

 

 

3 If you choose NO, use the arrow keys to select either EDIT or DELETE and then proceed with the needed changes.

EDIT *DELETE -SELECT&PUSH”YES”-

4 - 22

Facsimile Programming