RX Operation
RX Operation
Memory RX Mode
ON = Memory Lock
In Memory RX Mode, the machine stores all received documents in memory. The document is not printed until the machine receives a print command.
The print command can be activated by a timer or password. The print timer command instructs the machine to start printing the document stored in memory at the specified time. The password print command, instructs the machine to start printing when a password is entered.
A password print command can also be used to override the print timer command. If the print timer command has been set and you want to print your incoming messages before the set time, you can enter your password to print the document immediately.
Note: To set a password or to change you present one, contact your Key Operator for assistance.
OFF
If the unit is set in the Memory RX Mode OFF status, then the received document will be printed out directly instead of being stored in memory.
Case 1: If there is no data stored in the memory and the unit is set in OFF status, then the received documents print out directly.
Case 2: If there is a document stored in the memory and the unit is set in OFF status, then the previously received documents printed out first.
Note: You need to enter the correct password to print out the document if a password has been previously set.
1 Press the PROGRAM Key and scroll through the menus until you reach the RX Operation Menu. Press YES to begin programming.
2 Press 1 or scroll down to the Menu RX Mode menu and press YES.
3 Using the Left and Right arrows, select the option you wish to have as the default and press YES to enter this selection into memory.
RX OPERATION?
YES / or
1 MEM RX MODE? OK=YES
ON*OFF
Facsimile Programming | 4 - 27 |