Lanier 2001, 2002 Standby, Turning Power ON

Setting Up Fax Unit

Turning Power ON

1 Turn the Main ON/OFF Switch to the ON position.

CAUTION

Allow at least three seconds after turning the Main ON/ OFF Switch ON or OFF before pressing it again.

2 After the power is turned ON, the fax goes through an initialization

cycle until it is Ready. If not used for

a period of time, the fax unit goes into the Standby mode.

I O

3 If a problem occurs during a transmission causing the lose of system data or memory, this unit generates a Power Fail Report and emits short intermittent beeps.

Unpacking & Installation A - 9