Sending a Document

Sending a Document

Note: To use some of the fax functions such as One-Touch and Speed Dial you must first program your unit. If your unit has not yet been programmed, refer to Chapter 4 Programming.

Using Memory Transmit

Since your fax unit provides multi access capabilities, you can scan documents into memory for transmission, even if your unit is in the process of transmitting data from memory, receiving data or printing a file from the PC.

Note: If the unit runs out of memory during scanning, you can use manual transmission by pressing the HOOK key or by using the Direct (Non-Memory) Transmit procedure.

1 Place your document face down on the Document Feed Tray.

2 Adjust the Document Side Guides to the edges of the document.

NOV.07 12:34 100%-SET DOC. FACE DOWN-

3 Use the TYPE ORG. Key to select the desired contrast:

Use this setting

for this

 

 

Normal

Regular documents. (Default)

 

 

Dark

Documents that are dark.

 

 

Light

Documents with very fine or light characters.

 

 

Basic Operations

2 - 1