Dial Registration

7

Enter the Polling PW.

 

POLLING PW-_000

 

 

 

 

OK=YES (DEL=NO)

Once this function has been programmed, you use it by simply pressing the One-Touch Key you have just

programmed. This is documented in Chapter 3 Advanced Facsimile.

For 7 = Relay Initiate:

5

6

7

A screen appears to confirm Relay Initiate was your selection.

Select the One-Touch Key under which the remote unit you wish to use as a Relay Station was entered.

Press YES to accept your entry or use the arrows to select another.

RELAY INITIATE

-SEL. RELAY STATION-

ONE TOUCH 01 YES / or

Once this function has been programmed, you use it by

simply pressing the One-Touch Key you have just programmed. This is documented in Chapter 3 Advanced Facsimile.

Edit/Deleting

1 If you wish to change any entry, a screen allows you to accept or change.

2 If you wish to change a Key that was previously

 

REGISTERED! KEEP?

programmed, this message appears. Press YES to

OK=YES (EDIT/DEL=NO)

keep this location as is, or NO if you wish to edit it.

 

 

3 If you choose NO, use the arrow keys to select either EDIT or DELETE and then proceed with the needed changes.

EDIT *DELETE -SELECT&PUSH”YES”-

Batch TX

You can program your single location One-Touch Key to automatically batch documents. By assigning a batch time to a programmed One-Touch Key, you can eliminate repeated calls to the same number throughout the day. Your unit calls the remote unit at a preset time and transmits all documents stored in memory for this particular destination in one phone call.

Facsimile Programming

4 - 21