PCL4 Emulation (2002 only)

PCL4 Emulation (2002 only)

PCL4 emulation provides 300 dpi resolution, which is adequate for printing text. If you are printing a document that contains several graphics, you might prefer to use the GDI driver, which provides a higher (600 dpi) resolution or the PCL5e option. See “GDI Printer Feature” on page 5-7 for details.

Connecting to a Computer

Follow these instructions to install the cables.

CAUTION

Never connect or disconnect cables with the power to either unit ON.

1

2

3

Close all the open programs on the PC.

Be sure power to the computer and the fax unit are OFF.

Connect the parallel cable to the parallel connector (bottom port) on the your unit.

4 Connect the other end of the cables to the parallel port on the PC.

5 Turn power on to both the computer and the fax machine.

CAUTION

Static electricity can degrade your MFD unit operations and/or damage the unit. When the cable is not connected to your fax unit, cap the connector to guard against static electricity.

PC Printing & Scanning

5 - 9