Initial User Data

Initial User Data

Entering The Date & Time

When you set the date and time, they appear on the LCD when the unit is in standby mode. They also print at the top of each page you transmit to another location. The date and time must be set in order to use the Delay Transmit, Broadcast, and Polling functions of your unit. Follow these instructions for entering the current date and time.

1

2

Use the Memu Navigation procedure on page 4-1 to access the DATE & TIME? menu selection.

Press YES. Enter the Time and Date using the 10- Keypad.

1 DATE & TIME?

OK=YES

12:39

‘90 01 15

SET TIME

(OK=YES)

 

 

3 After entering this information, check to make sure it is correct. If correct, press YES to enter it in memory. If it is incorrect, press NO and re-enter the information.

Entering Your Telephone Number

To have your phone number display on the faxes you transmit:

1

2

Use the Memu Navigation procedure on page 4-1 to access the USER FAX NO.? menu selection.

Press YES. Enter your number.

2 USER FAX NO.?

OK=YES

_ OK=YES (DEL=NO)

3 After entering your number, check to make sure it is correct. If correct, press YES to enter it in memory. If the number is incorrect, press NO and re-enter the correct number

Facsimile Programming

4 - 5