Lanier LD230 Registering the Transfer Request, Registering a Transfer Station/Receiving Station

Registering the Transfer Request

Registering the Transfer Request

This section describes how to register the Transfer Station and Receiving Station used in the fax function's Transfer Request.

Note

❒Before you can use Transfer Re- quest, you must program the Poll- ing ID and set the Transfer Report. See “Programming a Polling ID”and “Transfer Report”, Facsim- ile Reference <Advanced Features>.

❖Transfer Station

Refers to the machine that receives the Transfer Request to forward in- coming messages to another desti- nation.

❖Receiving Station

Refers to the facsimile or computer that receives messages from the Transfer Station.

Limitation

❒When messages are transferred by fax, Transfer Stations must be ma- chines of the same manufacturer as this one, and have the Transfer Sta- tion function.

❒When messages are transferred by e-mail, Transfer Stations must be machines of the same manufactur- er as this one, and have both the Transfer Station and Internet Fax functions.

❒You cannot use Transfer Request without programming the fax number or e-mail address of the Requesting Party in the Address Book of the Transfer Stations.

Note

❒Polling IDs of the Requesting Party (this machine) and Transfer Sta- tions must be identical.

❒You can have up to 30 Receiving Stations per Transfer Station. If you specify a Transfer Station Group, the group counts as a sin- gle receiver.

Registering a Transfer

Station/Receiving Station

A Press the {User Tools/Counter}key. 5

ZFFH220E

B Press [System Settings].

C Press [Administrator Tools], and then press [TNext].

D Press [Address Book: Program / Change / Delete Transfer Request].

E Press [New Program].

109